DRUM SHAFT - WINDER for low workloads - Capacity 3000 kg - max. reel Ø 1600mm - CD-15/M3

CD-15/M3/SE-1/TC-1-60

View video

Technical info

Personnel safety guards ( CE standards)

Electro-hydraulically operated drum lifting

Mounted on steerable nylon wheels ( 2 fixed 2 turnable  with foot brake)

Electro-hydraulically operated cutter and jacks

Drum racked shaft

Powered by variable speed motor. Electronically controlled speed variation 0-70 rpm

380V 3-phases 50 Hz supply ( to be confirmed in the order)

For more technical specs, display the catalogue or the whole technical data sheet
If you have not found any configuration that meets your needs, please fill out the request data form, tell us how you work and we will be pleased to offer you the right equipment for you.

Standard accessories


Art. OA/10Q60
View video

Art. OA/10Q60

Linear measuring meter

Accuracy +/- 1,5% on round coated cables with diameter from 5 to 60mm

Remark:  head for measuring cables with diameter from 5 to 100mm on request

Select

Gruppo misura

Art. STRAT-MAN

Traversing device mounted on a screw drive spindle  with side hand-wheel enabling the operator to layer the cable neatly in safe conditions according to standards.

Select

Art. TC-1-60
View video

Art. TC-1-60

Electro-hydraulically operated cutter for copper cable with diameters up to 60mm

For steel ropes up to 23mm

Remark: cutter unit up to 100mm on request

Click  and fill the data form out to supply specifications on your cables

Select

Art. ST-EL
View video

Art. ST-EL

Electro-hydraulically operated anchor jacks to stabilize the machine

Select

SE-1
View video

SE-1

Electro-hydraulically operated drum lifting

Select

Accessories on request


Art. RIL-MOVE-2
View video

Art. RIL-MOVE-2

Electro-mechanical sensor to detect the machine displacement

It stops the machine in case of sudden movement. Very important accessory to prevent possible accidents, injuries to the operator and damages to the machine caused by mechanical entanglement of the cable at racks.

Select

NE218

Art. NE-218

Preset digital counter with 6 figures. Drive via encoder.

It enables the machine to slow down before stopping and not to spool over by inertia. 

Select

Art. SP-08/00
View video

Art. SP-08/00

To lay the cable neatly on the drum.

AUTOMATIC layering system proportional to the winding process 

Manual pitch setup by potentiometer with no control on perpendicularity

Easy and practical programming

Suitable for cable diameters ranging from 5 to 100mm 

Select

Art. SP-08/01
View video

Art. SP-08/01

To lay the cable neatly on the drum at place of art. SP-08/00

AUTOMATIC layering system that compared to the version SP-08/00 is able to control the cable layering at best thanks to electro-mechanical sensors that correct automatically possible delays due to reversing by the end of layer or to wrong cable diameter detection or setting.  

Programming for cable diameters ranging from 4 to 100mm 

Select

ER-CA-22-40
View video

Art. ER-CA-B-O-15

AC electrical motor driven manoeuvring carriage  to displace the machine without drum loaded

Power 0.37 kW

Displacement speed 27m/min

Forward/ reverse gear  

Remark: for cross displacement  you shall order the related options

Select

Art. COL-LANE-1

Art. COL-LANE-1

Slip ring to power supply from the ceiling

Select

RG-15

RG-15

Pair of turnable rear wheels for cross displacement  

This accessory shall be ordered if you have selected the item ER-CA-O-B-15

Select

OE
View video

Art. OE-15

Adjustable coiling head with removable flange for CD-15 winder

Cylindrical expanding inner diameter to remove the cable coil easily

Adjustable inner diameter from 320 to 620mm pitch 50mm

Overall dimensions: o/d 1000mm  w=500mm     40 kg weight

Max. coil o/d  950mm,   widths 115-220mm, max. coil weight 250 kg

Remark: heads with other o/d and i/d are available on request  

Select

Art. OE-B/R-10
View video

Art. OE-15-R-10

Collapsible coiling head  for CD-15 winder

Cylindrical expanding inner diameter to remove the cable coil easily

Fixed inner diameter : 320 or 520mm 

Overall dimensions: o/d 1000mm  w=500mm     40 kg weight

Max. coil o/d  950mm,   fixed widths 90 and 200mm, max. coil weight 250 kg

Remark: heads with other o/d and i/d are available on request  

Select

Art. OA/10Q/60/OM
View video

Art. OA/10Q/60/OM/N/I-S

Remark: it replaces the standard meter art. OA-10Q60

Linear measuring meter with in-house calibration

Accuracy +/- 0,5% on round coated cables with diameter from 5 to 60mm

Remark:  head for measuring cables with diameters from 5 to 100mm on request

 

Select

Art. TC-BA-30
View video

Art. TC-BA-30

Battery cutter for copper and alu cables
Max cable Ø 32mm
Cutting time 4 sec.
Two speeds
3 kg weight
One 1,5Ah battery 
Select

Alimentazione a batteria per ERCA
View video

Art. BA-ERCA/24/52

  • Power supply module with battery in DC-Batteries 24V provided with power set suitable for art. ER-CA
  • The machine can be moved without wire connection to the source power. Suggested in case of displacement from one racking row to the another or simply to transport a reel.
  • Work autonomy: 8 hours
  • Charging time: about 8 hours (night time)
  • no maintenance because of dry batteries
  • batteries life: 6-8 years
Select

Alimentazione a batteria per ERCA
View video

Art. BA-CD15/24/180

  • Power supply module with battery in DC-Batteries 24V provided with power set.
  • Work autonomy: 8 hours
  • power supply breakdown 24 V. the machine is reversible to a.c. 220V
  • Charging time: about 8 hours (night time)
  • no maintenance because of dry batteries
  • batteries life: 6-8 years
Select

Alimentazione a batteria per ERCA
View video

Art CHIOD50

  • Nailer powered by gas.
  • Portable nailer with gas cartridge and trigger gun with rechargeable battery
  • Very powerfull
  • Fast and well balanced
Select

Art. OA/10Q/60/OM/N/MID-SN

Art. OA/10Q/60/OM/N/MID-SN

Remark:  replace item OA/10Q60
Linear measuring meter calibrated under MID European Directive for cables with diameter from  5 to 60mm

Accuracy ± 0,5% on round coated cables with diameter from 5 to 60mm

Select

Art. OA/10Q/100/OM/MID-SN

Art. OA/10Q/60/OM/MID-SN

Remark:  replace item OA/10Q60
Linear measuring meter calibrated under MID European Directive for cables with diameter from 5 to 60mm
Complete with digital prset metercounter 

Accuracy ± 0,5% on round coated cables with diameter from 5 to 60mm

Select